Olympus Electronic Flash Power Bounce Grip 2 for T-20 and T-32 Flashguns

Olympus Electronic Flash Power Bounce Grip 2 for T-20 and T-32 Flashguns

Click here to see similar items on eBay, and to buy.

Olympus Electronic Flash Power Bounce Grip 2 for T-20 & T-32 Flashguns Product Condition
Good condition ,  Tested And Working , see pics for actual item for sale

Product Description

 

The Power Bounce Grip 2 adds off-camera flash and bounceflash possibilities to the T20 and T32, and gives the flash extra battery powerwith increased number of flashes and reduced recycling time.  The T32 (or T20) + Power Bounce Grip 2 combination works as1) a higher output power source operating on four 1.5V”C” batteries2) a grip type electronic flash unit3) a bounce flash unit.Auto bounce flash is possible in conjunction with a TTL AutoCord T and the flash set to TTL “OTF” Auto flash.A built-in TTL Auto Cord socket allows TTL “OTF”Auto flash with both the T20 and the T32.The unit consists of a bracket and a removable grip forconvenience in carrying and storing. The bracket with a built-in synch cordconnects to the grip instantly.The On/Off switch on the flash activates both the”AA” batteries in the flash and “C” batteries in the grip.The recycling time with the T32 is 0.2~9sec. with Alkalinebatteries and 0.2~7 sec with Ni-Cd batteries; the number of flashes is increasedto 200~1000 in auto operation (0.2~10sec recycling time and 100~500 flashes forT32 used without Power Bounce Grip 2).The angle of the Bounce Head can be adjusted from 90 upwardto 20 downward, 60 right and 240 left for convenient bounce flash close-upflash photography. The Bounce Head is locked by a lever.This unit has a Motor Drive release button that allowsoperation of the Motor Drive or Winder by the right hand holding the unit.   Four 1.5V “C” batteries are used (Excluding Ni-Cdbatteries).An External Power Socket accepts the output plug of the F.ACAdapter 2 or 3.The Grip Strap can be attached to the eyelets of the PowerBounce Grip for a more stable grip.Five tripod screw holes on the bracket allows free choice ofcamera position.The camera can be mounted to either the right or left-handside of the grip by swiveling the bounce head 180.The Quick Auto 310 flash cannot be used.The full-synchro flash F280 (with TTL Auto Cord F0.6m) canbe used, but the batteries in the grip will not provide extra power.The Flash Extender can be attached to give extra extension,when the rubber plug at the front of the Extender is removed, but the batteriesin the grip will not provide extra power.The T18 flash cannot be used unless the Flash Extender isalso used.M.Grip Cord is required to electrically connect the PowerBounce Grip 2 to a Motor Drive or Winder.The batteries must be removed from the grip when the unit isnot to be used for long periods

Included In Sale

Olympus Electronic Flash Power Bounce Grip 2

 

Notes :
DO NOT USE RECHARGEABLE NI-CAD BATTRIES IN THIS UNIT

 
 

 _gsrx_vers_841 (GS 7.0.16 (841))

Click here to buy, and to see similar items on eBay

 

 


Category: Cameras and Photography:Flashes and Accessories:Flash Brackets
Location: South Coast